Kinetics Model SH Vibration Isolation Hangers are designed to reduce the transmission of vibration and noise produced by suspended mechanical equipment and piping systems. Each SH Spring Hanger incorporates a high-deflection, color-coded steel spring element, a No-Short spring cap, and a noise isolation pad assembled within a stamped or welded hanger bracket.

The SH Spring Hanger is suitable for applications where the minimum static deflection requirement exceeds 0.4″ / 10 mm. The freestanding steel spring is designed with a minimum lateral stiffness of 1.0 times the rated vertical stiffness, helping maintain stable performance in suspended HVAC and MEP installations. SH hangers also allow support rod misalignment through a 30° arc without metal-to-metal contact or vibration short-circuiting.

Model SH Spring Hangers are recommended for suspended mechanical equipment, in-line fans, exhaust fans, cabinet fans, ductwork, and piping located near vibration-sensitive or noise-critical areas. The 1″ and 2″ SH hanger models feature Kinetics’ patented No-Short self-centering spring cap, which helps keep the rod and washer centered to reduce the risk of short-circuiting during installation and operation.

For consultants, contractors, acoustic specialists, and MEP engineers across the UAE, GCC, Middle East, and MENA region, SH-1″, 2″ & 4″ Spring Hangers provide a reliable solution for low-frequency vibration isolation in suspended building services systems. The hangers are available in deflections from 1″ to 4″ / 25 to 102 mm and load capacities from 35 to 3850 lbs / 16 to 1746 kg,

How the self-centering no short cap works:

Indexed steps in spring cap correspond to standard washer diameters for the appropriate rod diameter. The washer and rod stay centered in the cap. Featured on the 1″ and 2″ SH Hangers only. Patent No. 5,653,426

Vibration isolation hangers shall be Model SH, as manufactured by Kinetics Noise Control, Inc.